mail-icon
Need assistance with selecting the correct solution to meet your specific requirements?

pdf-icon
To see the entire brochure

SYSTEM FOOTPRINT

DIMENSIONS L X W X H inches (mm)

  • 100” x 130” x 117” (2540 mm x 3886 mm x 2971 mm)

 

BAUER GRU®  28 Performance At Various Horsepower and Suction Pressure Combinations
Motor Suction Pressure Max Final Pressure Flow At Min RPM Flow At Max RPM
HP kW PSIG BAR PSIG BAR RPM SCFM KG/MIN M3/H RPM SCFM KG/MIN M3/H
BAUER GRU® 28 (175HP/131kW)
175 131 1 0.069 240 16 1800 379 12.9 611 2200 469 16 755
175 131 3.5 0.24 240 16 1800 441 15 710 2150 533 18.1 857
175 131 7 0.48 240 16 1800 528 17.9 849 2050 556 20.6 895
BAUER GRU® 28 (200HP/150kW)
200 150 1 0.069 240 16 1800 379 12.9 611 2600 559 19 900
200 150 3.5 0.24 240 16 1800 441 15 710 2500 624 21.2 1005
200 150 7 0.48 240 16 1800 528 17.9 849 2300 684 24 1101
BAUER GRU® 28 (250HP/190kW)
250 190 1 0.069 240 16 1800 379 12.9 611 2800 604 20.6 973
250 190 3.5 0.24 240 16 1800 441 15 740 2700 676 23 1089
250 190 7 0.48 240 16 1800 528 17.9 849 2600 778 26 1252

All performance values referenced in the table above are based on the following conditions:  Referenced to ISO 1217 (14.50 psi (100 kPA), 68° F (20° C), 0% RH), Biogas temperature at compressor inlet: 86° F (30° C).  Biogas Composition:  52% CH4, 46% CO2, 1% N2, 1% O2.  Discharge pressure at compressor skid edge: 230 psig (15.8 bar).  Any deviations from these conditions will modify the stated performance results.  Consult with your BAUER representative for conditions other than referenced herein.