mail-icon
Need assistance with selecting the correct solution to meet your specific requirements?

pdf-icon
To see the entire Breathing Air Brochure

SYSTEM FOOTPRINT

DIMENSIONS L X W X H inches (mm)

  • 43” x 24” x 27” (1092mm x 609mm x 686mm)

WEIGHT pounds (kg)

  • 300-400 lb (136-181 kg)

AVAILABLE ACCESSORIES (FACTORY INSTALLED)

  • B-Timer (P-31)
  • Purification upgrade P31 to P41 (for 6K DMT 10 applications)

AVAILABLE ACCESSORIES (DEALER/CUSTOMER INSTALLED)

  • Lift handles
  • Tubular frame
  • Wheel kit (lift handles or tubular frame required)
  • Riser feet for in-house applications (electric drive only)

STANDARD SCOPE OF SUPPLY

  •     Available in two sizes: 8 & 10 SCFM
  •     Choice of prime mover/drive  
  •     Electric motor, single phase, or 3-phase
  •     Gasoline engine
  •     Diesel engine (DMT 08)
  •     Inlet filter
  •     Stainless steel intercoolers and after cooler
  •     High temperature switch (except D drive)
  •     Vibration isolators
  •     P31 Purification
  •     Low oil pressure switch (electric and engine drive with electric start)
  •     Motor starter with NEMA 4 enclosure 
  •     Hour meter
  •     Pressure switch
  •     Visual CO/moisture indicator

DIVE MATE ELITE

  • Inter-stage gauges
  • Automatic condensate drain
  • Electric start (DMT 08-G/D DMT 10-G)

TECHNICAL DATA

Model Charging Rate1 Number of Stages Motor FAD2 RPM Purification System
  scfm l/min   HP kW      
5000 PSIG (345 BAR) 
DMT08-E1/E3 8.4 238 3 7.5 5.6 7 1250 P31
DMT08-GS 8.4 238 3 9 6.7 7 1250 P31
DMT08-DH 8.4 238 3 6.4 4.7 7 1250 P31
5000 PSIG (345 BAR) - 6000 PSIG (414 BAR)
DMT10-E1/E3 9.7 275 4 7.5 5.6 8.1 1180 P31
DMT10-GS 9.7 275 4 13.5 10 8.1 1180 P31

1) Based on recharging an 80 cubic foot tank from 500 to 3000 psig
2) Compressor capacity referenced to standard inlet conditions
E1= Single phase electric, 230 VAC/60 Hz  
E3 = Three phase electric, 208/230/460 VAC/60 Hz. 
Other voltages available on request
GS = Gasoline engine drive, SUBARU DH = Diesel engine drive, HATZ
Dimensions and weight are approximate and are subject to change