IE 120II/PB-E1
- 7.5 HP EPACT ODP Electric Motor
- Motor Starter with Overload Relay and Reset Push-Button
- Prewired for 230/1/60 - Other Voltages Available
- Fused Control Voltage Transformer
- Automatic PLC Control
- Automatic Drain Control
- Emergency Stop Push-Button
- NEMA 4 Electrical Enclosure
- U.L. Listed Electrical Panel
- ON/OFF Selector Switch
- Hourmeter
- Inlet Filter
- Gear Driven Oil Pump
- Oil Filter
- Coalescing Final Seperator
- Pressure Gauge and Switch for Oil Pressure
- High Temperature Switch
- Warning and Alarm Lights with Automatic Lamp Test
- Final Relief Valve
- Pressure Maintaining Valve
- Condensate Collector
- Vibration Isolators for Mounting Feet (4)
- Powder Coat Finish
- Open Horizontal Design
- 5 ft. Long Fill Hose with CGA 347 Connector Hose Supplied Loose
- Dimensions: 52.5" L x 35" W x 33" H
- Dry Weight: 650 lbs.
|
R1X1V/DOT50/BULK02/0/I
- Heavy-Duty Welded Steel Rack with Powder Coat Finish
- Assembled Complete with Cylinders in a Vertical Arrangement
- CGA 347 Connector at Inlet
- Pressure Gauge
- Vent Valve
- Interconnecting Tubing and Fittings between Storage Cylinders with Seamless,
High Pressure Stainless Steel Tubing for Bulk Storage
- Adjustable High Pressure Regulator
- Pressure Gauge at Outlet of Regulator
- 10 Ft. Long Fill Hose for Connecting Outlet of Regulator to Inlet of Fill
Panel, Hose Supplied Loose from Storage
- Dimensions: 26" L x 17.5" W x 60" H
- Dry Weight: 430 lbs.
|
PIT BOSS/4500
- Push-Button Fill Valve with Automatic Venting
- Fill Pressure Gauge
- Relief Valve at Inlet for Overpressure Protection, Preset at 4700 PSI
- Powder Coat Finish on Panel
- 2-Ft. Long Fill Hose with BAUER Quick-Connect Fill Coupling, Hose Supplied
Loose
- Dimensions: 7.5" L x 7.75" W x 8.5" H
- Dry Weight: 11.5 lbs.
|
