Home > FX-10DM-E Setup for SNG V1.1
FX-10DM-E Setup for SNG V1.1
1328 Azalea Garden Rd.
Norfolk VA. 23502
757-855-6006
Fax: 757-855-3761
Date: February 12, 2003
Contact: Research & Development ( )
This information bulletin affects - SNG7 V1.1 with FX10DM text display
To enter the setup parameters of the FX-10DM text display:
1) Power the monitor by powering up the PLC
2) Press "FNC" and "ENT" at the same time to enter the System Mode
3) Scroll to option #3:MONITOR SET and press "ENT"
4) With the MONITOR SET screen displaying option 1:DISPLAY SET press "ENT"
5) Use the scroll keys and the "ENT" key to select and set the following options:
| Line # | Data address | Data Type | Description |
|---|---|---|---|
| No.1 | D0 | Message | System Status |
| No.2 | D200 | Comment | Pressure |
| No.3 | D10 | Message | Fault Code |
| No.4 | D202 | Comment | Temperature |
| No.5 | D50 | Message | Hourmeter 1 |
| No.6 | D51 | Message | Hourmeter 2 |
| No.7 | D60 | Message | Runtime |
| No.8 | D1220 | Comment | Next ACD |
6) After setup complete, Press "CLR" 2 times to return to "SYSTEM MODE".
7) Use scroll keys to select 4: Other and press ENT
8) Use Scroll keys to select 5: Read Out Com and press ENT
9) Use down arrow to selet 0:Read and press ENT
10) Press "CLR" 2 times to return to "SYSTEM MODE 1:Entry Monitor" and press ENT.