Home > Products & Solutions > Breathing Air Systems > Scuba diving > Portables

Portables

JUNIOR II and OCEANUS, complete with air purification system and fill hose are safe, reliable three stage compressors designed for serious sport divers. Available in single phase 115/230 VAC and three phase 230/460 VAC electric motor, gasoline or diesel engine drive.

Junior-E3
JRII-E3
Gas Motor Drive Download PDF for more information Get the New BAUER Breathing Air Brochure

STANDARD SCOPE OF SUPPLY

  • BAUER Breathing Air Purification System
  • Belt guard designed to meet OSHA guidelines
  • Inlet filter
  • Vibration isolators
  • High temperature switch (G drives)
  • Five foot fill hose assembly with SCUBA yoke
  • Bleed valve and pressure guage

Oceanus Models

  • Sturdy,long lasting low pressure oil pump
  • Large oil sump allows shipboard
    inlination of 30°(20°G drive)
  • Capable of filling/maintaining up to a
    two cylinder 5000 psig DOT storage system
  • Corrosion-resistant coolers and stainless steel frame

AVAILABLE ACCESSORIES (factory installed)

  • Visual CO/Moisture monitor
  • Final pressure switch for gasoline engine
  • Hourmeter / Tachometer (G drive)
  • HONDA gasoline engine

DIMENSIONS L x W x H inches (mm)

  • JUNIOR II 42 x 19 x 23 (1067 x 483 x 584)
  • OCEANUS 32 x 18 x 23 (813 x 457 x 584)

WEIGHT pounds (kg)

  • JUNIOR II 89 - 165 (40 - 75)
  • OCEANUS 96 - 135 (44 - 61)

 

Technical Data

ModelCharging
Rate*
Number
of
Stages
MotorFAD**RPMPurification
System
 scfmI/min hpkW   
5000 psig (345 bar)
JRII-E1/115 2.9 82 3 2 1.5 2.5 1500 P0
JRII-E1 3.9 110 3 3 2.2 3.2 2100 P0
JRII-E3 3.9 110 3 3 4.5 3.2 2100 P0
JRII-G 4.3 122 3 6 3 3.6 2300 P0
JRII-D 4.3 122 3 4 1.5 3.6 2300 P0
JRII-E1Y/115 2.9 82 3 2 2.2 2.5 1500 P0
JRII-E1Y 3.9 110 3 3 2.2 3.2 2100 P0
JRII-E3Y 3.9 110 3 5 3.7 3.2 2100 P0
OCEANUS-E1 4.9 139 3 5 3.7 4.1 2150 P0
OCEANUS-E3 4.9 139 3 5 3.7 4.1 2150 P0
OCEANUS-G 4.9 139 3 6 4.5 4.1 2150 P0
OCEANUS-E1Y 4.9 139 3 5 3.7 4.1 2150 P0
OCEANUS-E3Y 4.9 139 3 5 3.7 4.1 2150 P0

NOTE:JRII is designed for filling an individual SCUBA or SCBA. It is neither designed nor intended for filling cascade storage systems of any kind.
*Based on recharging an 80 cubic foot tank from 500 to 3000 PSIG.
**Compressor capacity referenced to standard inlet conditions.
E1/115 = Single phase electric, 115 VAX/60 Hz E1 = Single phase electric, 230 VAC/60 Hz. E3 = Three Phase Electric, 230/460 VAC/60 Hz
G = Gasoline engine drive, SUBARU D = Diesel engine drive, YANIMAR Y = Yachting package Dimensions and weights are approximate and are subject to change.